3M Steri-Vac Sterilizer/AeratorGSSeries

3MTM Steri-VacTM Sterilizer/AeratorGSSeriesethylene oxide (EO) sterilizer/aerators are designed to be used with3MTM Steri-GasTM EOGasCartridgestoprovideasafe and effective low temperature sterilization process for healthcare applications.

The Steri-Vac GS Series sterilizer, Models GS5 and GS8 can automatically aerate the processed load in the sterilization chamber after EO gas sterilization. The GS Series sterilizer is a self-contained system which requires only power, compressed air and exhaust vent lines for operation. Nofloordrainsorbulktanksofethyleneoxideareused.

In addition, no external steam or water connections are required, as each GS Series sterilizer has a self-contained internal distilled water tank filled by the Operator. The
GS Series sterilizer requires minimal floor space and can be installed free-standing, on a rack, or in-wall. Both the GS5 and GS8 sterilizers are available in a single door

or double-door configuration, facilitating pass-through processing for controlled environments. Mounting frames and finishing fascia panels are also available. The GS5 and GS8 provide 136 L (4.8 cubic feet) and 224 L

(7.9 cubic feet) of usable chamber space, respectively.

 

Category:

Description

3M offers equipment services to support installation and on-going maintenance of
3MTM Steri-VacTM Sterilizer/Aerator GS Series products and accessory equipment. The following documents provide additional information related to accessory equipment, planning, installation, qualification, calibration and compliance

•3MTM Steri-VacTM Sterilizer/AeratorSite Planning and Installation Guide

•3MTM EOAbatorModel50System (brochure)

•3MTM EOAbatorSitePlanningand Installation Guide

•3MTM Steri-GasTM EOGasCartridge Product Profile

•SDS3MTM Steri-GasTM Cartridge4-100

•SDS3MTM Steri-GasTM Cartridge8-170

•3MTM Steri-VacTM EquipmentServices (brochure)

Reviews

There are no reviews yet.

Be the first to review “3M Steri-Vac Sterilizer/AeratorGSSeries”

Your email address will not be published. Required fields are marked *